Installation Guide

ManualsBrandsNoble House ManualsOutdoor Coffee TablesKashton Brown Wash Square Wood Outdoor Coffee Table

Caution: This Table is NOT a TOY.

Keep your child/children at bay during the assembly process.

Whenever moving/lifting the Table and to prevent damage to the Table, two adult

partners may be needed to execute these actions.

Assembly Instructions

Caution: You must read this Assembly instructions before you proceed.

Please look in the Leg Frame for all hardware.

TABLE

Noble House Home Furnishings LLC 1

Summary of content (5 pages)

PAGE 1
Assembly Instructions Caution: You must read this Assembly instructions before you proceed. Please look in the Leg Frame for all hardware. TABLE Caution: This Table is NOT a TOY. Keep your child/children at bay during the assembly process. Whenever moving/lifting the Table and to prevent damage to the Table, two adult partners may be needed to execute these actions.
PAGE 2
Part List Label Picture Description QTY A Table Top 1 B Leg Frame 2 Hardware Label Picture Description QTY ① Bolt (M6x40mm) 11 ② Allen Wrench 1 Assembly Preparation Before Beginning Assembly: x 11 x1 Noble House Home Furnishings LLC 2
PAGE 3
Assembly Steps Overview This Table has multiple parts and may require up to 10 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
PAGE 4
Step 2 With assistance from your adult partners, turn the Table Top (A) (bottom-side up) and place on a clean, non-marring surface to avoid any scratches or damage to the product. Attach the Leg Frames(B) onto the Table Top(A) using Bolts(①) and the Allen Wrench(②). DO NOT fully tighten the Bolts. Step 3 Attach the remaining Leg Frame(B) onto the Table Top(A) using Bolts(①) and the Allen Wrench(②). DO NOT fully tighten the Bolts.
PAGE 5
Step 4 Stand the Table up, with assistance from your adult partner. Exert pressure floorwards, onto the Table with both your hands. This pressure will help the Legs and Table Top reach full alignment status. Check for wobbles on a LEVEL surface. If no wobbles are found proceed to tighten the Bolts in a sequential manner, until evenly secured. When tightening the Bolts tighten sequentially. Do not tighten any Bolt fully and then move on towards the next one.