Use and Care Manual

Hook the Chain with Carabiners (J) through the 2 two loop holes of at then end of
Hammock with Wooden Support Bars (M).
Step 7
Step 5
Screw theBolt and Ring Nut(Q) to the four ends of the Wooden Suport Rails using allen
key (R)
Tighten the bolts of this step securely.
Step 6
Insert the Bolt and Ring Nut (N) into the Support Bar to hold Hammock(A), as shown in
the picture.
Tighten the bolts of this step completely.
N
J
J
M
Note: Tags Should Be facing Down
Note: Ring nuts must all be facing the same direction
Noble house Home Furnishings LLC 5 OF 7