Assembly Instructions Caution : You must read this before you proceed COFFEE TABLE Part List Label Picture Description QTY A Table Top 1 B Leg 3 Page 1 of 5
Hardware Label Picture ① Description QTY Gasket 4 Assembly Preparation Before Beginning Assembly: Assembly Steps Page 2 of 5
Overview Table Top (A) Leg (B) This Coffee Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Coffee Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all parts onto a clean, non-marring surface. Remove the Black Cover on the threaded stem of the Legs(B).
Step 2 Place Table Top(A) facedown as pictured above. Install the Legs(B) into the bottom of the Table Top(A) by placing a Gasket(①) onto the threaded stem of the Legs. And then insert the threaded stem into the threaded mounting position at each Corner of the Bottom of the Table Top(A). Tighten by turning the Legs clockwise. Position Table right side up and test for stability on a Level Surface. Note: The use of Gaskets are OPTIONAL and are especially useful to help alleviate slight wobbles.
Care & Maintenance Page 5 of 5