Caution : You must read this before you proceed Single Sofa Label Picture Description QTY A Left Armrest 1 B Right Armrest 1 C Sofa Back 1 D Sofa Seat 1 E Seat Cushion 1 F Back Cushion 1 Noble House Home Furnishings LLC.
Label Picture Description QTY ① Bolt (M6*40mm) 12 ② Washer Rings 12 ③ Allen Key 1 Before Beginning Assembly: Noble House Home Furnishings LLC.
Overview This Sofa has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Sofa parts, the above picture is to help you put the various parts into perspective. Please read through the instructions here below to familiarise yourself with the parts and steps before assembly. Step 1 Noble House Home Furnishings LLC.
Open the carton and place all the parts onto a clean and soft surface. Unpack all packages of hardware. Place the Sofa Back (C) to Right Armrest (B),make the metal rod on the Sofa Back (C) insert into the mounting position . Attach the Sofa Back (C) and Right Armrest (B) together using Bolts (①) and Washers (②) with Allen Key (③) as shown in Picture. DO NOT FULLY TIGHTEN THE BOLTS. ATTENTION: There may be some PE wicker that may have covered the bolt points.
Step 3 Attach Left Armrest (A) between Sofa Seat (D) and Sofa Back (C) using Bolts (①) and Washers (②) with Allen Key (③) as shown in Picture. DO NOT FULLY TIGHTEN THE BOLTS. Step 4 Turn the Single Sofa right side up. Place the Single Sofa on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and gracefully, sit into to the Sing Sofa. This would help to align all the parts at all the joint areas.
Step 5 Put the Seat Cushion(F) and Back Cushion(E) on the Single Sofa. Your Single Sofa is ready for use. This Single Sofa can only be used on the flat and level surface. Noble House Home Furnishings LLC.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
Loveseat Label Picture Description QTY A Left Armrest 1 B Right Armrest 1 G Sofa Back 1 H Sofa Seat 1 I Seat Cushion 2 J Back Cushion 2 Noble House Home Furnishings LLC.
Label Picture Description QTY ① Bolt (M6*40mm) 13 ② Washer Rings 13 ③ Allen Key 1 Before Beginning Assembly: Noble House Home Furnishings LLC.
Overview This Love Seat has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Love Seat parts, the above picture is to help you put the various parts into perspective. Please read through the instructions here below to familiarise yourself with the parts and steps before assembly. Step 1 Noble House Home Furnishings LLC.
Open the carton and place all the parts onto a clean and soft surface. Unpack all packages of hardware. Place the Sofa Back (G) to Right Armrest (B), make the metal rod on the Sofa Back (G) insert into the mounting position. Attachthe Sofa Back (G) and Right Armrest (B) together using Bolts (①) and Washers (②) with Allen Key (③) as shown in Picture. DO NOT FULLY TIGHTEN THE BOLTS. ATTENTION: There may be some PE wicker that may have covered the bolt points.
Step 3 Attach Left Armrest(A) between the Sofa Seat (H) and Sofa Back (G) using Bolts (①) and Washers (②) with Allen Key (③) as shown in Picture. DO NOT FULLY TIGHTEN THE BOLTS. Step 4 Turn the Loveseat right side up. Place the Loveseat on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and gracefully, sit into to the Loveseat. This would help to align all the parts at all the joint areas.
Step 5 Put the Seat Cushion(I) and Back Cushion(J) on the Loveseat. Your Loveseat is ready for use. This Loveseat can only be used on the flat and level surface. Noble House Home Furnishings LLC.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.
Table Label Description QTY K Table Leg 2 L Table Top 1 M Middle Shelf 1 N Support Bar 1 Description QTY ② washer Rings 13 ③ Allen Key 1 ④ Bolt (M 6*15) 5 ⑤ Bolt (M 6*25) 5 ⑥ Bolt (M 6*35) 5 Label Picture Picture Noble House Home Furnishings LLC.
Before Beginning Assembly: OVERVIEW This Table has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions here below to familiarise yourself with the parts and steps before assembly. Noble House Home Furnishings LLC.
Step 1 Open the carton and place all the parts onto a clean and soft surface. Unpack all packages of hardware. Place the Table top (L) with its inner side, facing skywards . Put the Table Leg (K) against the Table top (L), Attach Table Leg (K) and Table top (L) together using Bolts (⑥) and Washers (②) with Allen Key (③) as shown in Picture. DO NOT FULLY TIGHTEN THE BOLTS.
Step 3 Attach Support Bar (N) between Table leg (K) using Bolts (④) and Washers (②) with Allen Key (③) as shown in Picture DO NOT FULLY TIGHTEN THE BOLTS. Note: Better to fix this step by 2 person together. Step 4 Place the table on a LEVEL SURFACE to check for wobbles. If it wobbles lift the table to some 30cm to 50cm height from the ground. Keep your feet and toes well away from the drop zone. Drop the table freely and vertically with the legs, hitting the ground, all at the same time.
Step 5 Now your Table is ready for use. The Table can only be used on a flat & level surface. Noble House Home Furnishings LLC.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.