Caution : You must read this before you proceed Table Label Description QTY A Table Top 1 B Leg 2 C Top Side Bar 2 D Footrest 2 Description QTY ① Bolt (M6*25MM) 9 ② Bolt (M6*20MM) 17 ③ Allen Key 1 ④ Allen Key 1 Label Picture Picture Page 1 OF 5
Before Beginning Assembly: Overview Table Top (A) Top Side Bar (C) Leg (B) Footrest (D) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Step 1.1 C B C B Step 1.2 Open the carton and place all the parts onto a clean, non-marring surface. Place the Leg(B) with its inside facing up. Insert Top Side Bars(C) into Leg(B). 1.1) Attach the Top Side Bar(C) to Leg(B) using Bolts(②) with Allen Key(③) as shown above. 1.2) Attach the Top Side Bar(C) to Leg(B) using Bolts(①) with Allen Key(④) as shown above. Do not fully tighten the Bolts. Step 2 D D B Step 2.1 B Step 2.2 Insert Footrests(D) into Leg(B). 2.
Step 3 C D B Attach Leg(B) to Top Side Bars(C) and Footrests(D) using Bolts(②) with Allen Key(③) as shown above. Attach Leg(B) to Top Side Bars(C) and Footrests(D) using Bolts(①) with Allen Key(④) as shown above Do not fully tighten the Bolts. Step 4 Stand the Table up and check for stability. Then proceed to tighten all Bolts at all joints. Note: DO NOT fully tighten a BOLT in one go and then move on to the next.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
