Caution : You must read this before you proceed Table Label Description QTY A Table Top 1 B Table leg 2 Description QTY ① Bolt (M6*30MM) 7 ② Bolt (M6*25MM) 5 ③ Washer 11 4 Allen Key 1 5 Plastic gasket 4 Label Picture Picture Noble House Home Furnishings LLC Page 1 OF 4
Before Beginning Assembly: Overview FRONT FACING This Table has multiple parts and may require up to 15 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Open the carton and place all the parts onto a clean, non-marring surface. Slide the Table leg (B) vertically down into the Table Top(A) as shown in picture. Step 2 Attach the Table Legsl(B) to Table Top(A)using Hardware(①,②) with Allen Key(③) as shown in Picture . Step 3 Adjust the pre-installed Levelers at the end of each Table Leg until the Table is level with the ground. Your Table is ready for use. This Table can only be used on the flat and level surface.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.