Instructions / Assembly

Label Picture Description QTY

A Umbrella Base 1

B Locking Bolt 1

C Support Pole 1

Remind: Umbrella open diameter max. 8 feet

Caution : You must read this before you proceed

Umbrella Base

Umbrella Base Weight : 48lbs

Noble House Home Furnishings LLC Page 1 OF 5

PAGE 1
Caution : You must read this before you proceed Remind: Umbrella open diameter max.
PAGE 2
D Adjustable Screw 1 E Cap 1 F Adapter for 38mm Pole 1 G Adapter for 48mm Pole 1 Before Beginning Assembly: WARNING: CHOKING HAZARD. Do not allow children to play with plastic wraps or any small parts in this package. Notice: As a safety precaution, when your Umbrella is not in use, please close the Umbrella.
PAGE 3
Overview (D) This Umbrella Base has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Umbrella Base parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise youself with the parts and steps before assembly. Step 1 This is a two person team assembly product. （1.1）Screw Locking Bolt(B) into the bottom of Support Pole(C). （1.
PAGE 4
Step 3 - A Used for Umbrella Pole with 38mm diameter. Insert Adapter for 48mm Pole(G) into the Support Pole(C) first, then put the Adapter for 38mm Pole(F) onto the Adapter for 48mm Pole(G). Turn the Cap(E) onto the Support Pole(C) to lock the Adapters in place. Your Umbrella Base is ready for use. This Umbrella Base only be used on a flat, level surface. Step 3 - B Used for Umbrella Pole with 48mm diameter. Insert Adapter for 48mm Pole(G) into the Support Pole(C).
PAGE 5
Noble House Home Furnishings LLC Page 5 OF 5