Caution : You must read this before you proceed Remind: Umbrella open diameter max.
C Support Pole 1pc D Adjustable Screw 1pc E Cap 1pc F Adapter for 38mm pole 1pc G Adapter for 48mm pole 1pc Before Beginning Assembly: WARNING : AVOID CHOKING / CHOKING HAZARDS : Do not allow children to play with plastic wraps and / any small parts in this package. Notice: As a safety precaution, when umbrella is not in use please turn down umbrella.
Overview (D) This UMBRELLA BASE as multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the UMBRELLA BASE parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly. Step 1 This is a 2-person team assembly product. Screw Support Pole (C) into the umbrella base (A). Step 2 Screw the Adjustable Screw (D) into the Support Pole(C).
Step 3 - A For the Umbrela Pole with diameter as 38mm, use Dia. 38mm Adapter (F) & Dia. 48mm Adapter (G) added together, insert the Dia. 48mm Adapter (G) into the Support Pole (C) first, and then put the Dia. 38mm Adapter (F) onto the Dia. 48mm Adapter(G), Turn the Cap(E) onto the Support Pole(C) to hold the Adapters in place. The Umbrella Base is fully assembled and ready for use. Step 3 - B For the Umbrela Pole with diameter as 48mm, use the Dia. 48mm Adapter (G) only, insert the Dia.
Page 5 OF 5
