Caution : You must read this before you proceed Sofa Label Picture Description QTY A Backrest 1 B Seat 1 Noble House Home Furnishings LLC Page 1 OF 6
C Seat Cushion 1 D Back Pillow 2 Description QTY ① Box Wrench 1 ② Bolt (M8*45mm) 5 ③ Spring Washer 5 ④ Washer 5 ⑤ Clip 2 Label Picture Before Beginning Assembly: Noble House Home Furnishings LLC Page 2 OF 6
Overview Back Pillow (D) Seat Cushion (C) Backrest (A) Seat (B) This Sofa has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Sofa parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 Attach Backrest(A) to Seat(B) using Bolts(②), Spring Washers(③), and Washers(④) with Box Wrench(①). Tighten Bolts fully in a sequential manner after all Bolts are in place. Step 3 Stand the Sofa upright. Put the Seat Cushion(C) & Back Pillow(D) on the Sofa. Your Sofa is ready for use. This Sofa can only be used on a flat, level surface.
Additional Hardware : Clip(⑤) In the event that you should purchase more than one piece of this Sofa, the Connector Clips(⑤) can be used to link up the Sofas to achieve a Sectional Sofa. Simply place the Sofas together and firmly push the Connector Clip(⑤) down until it locks into place.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
