Instructions / Assembly

Noble House Home Furnishings LLC 3 of 7
Step 1
Step 2
This Armless Sofa Chair has multiple parts and may require up to some 30
minutes to assemble.
To give you an overview of the Armless Sofa Chair parts, the above picture
is to help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with the
parts and steps before assembly.
Position the Chair Seat(A) on its back,as shown.
Unzip to open pouch and remove the 4 wooden legs and Back Cushion ,
close the pouch.
Install the Legs(D) into the bottom of the Chair Seat(A) by placing a Washer Rings(①)
onto the threaded stem of the Legs.
And then insert the threaded stem into the threaded mounting position at each Corner
of the Bottom Chair Seat(A)).
Tighten by turning the Legs clockwise.
Note: The use of Washer Rings(①) are OPTIONAL and are especially useful to help
alleviate slight wobbles.
Some Legs may need more than one Gasket whilst some Legs may not need any.
Position Sofa right side up and test for stability on a Level Surface.
Add or remove Washer Rings(①) where needed to achieve stability.
D
D
D
A
C
A
Washer Ring(
①
)