Caution : You must read this before you proceed Wooden Stand with Hammock Label Picture Description QTY A Bed Supporting Bar 2 B Supporting Bar 1 C Leg 4 D Safety Line 4 E Metal Connection 2 F Hammock 1
Label Picture Description QTY ① Bolt (M8×90MM) 2 ② Ring Nut (M8) 4 ③ Eye Bolt (M10×70MM) 2 ④ Carabiner 4 ⑤ Handle 1 ⑥ Wrench 1 ⑦ Nut 2 ⑧ Washer 2 ⑨ Allen Key 1 ⑩ Wing Nut 10 ⑪ Bolt (M8×80MM) 10 ⑫ Ring Bolt (M8×20MM) 4 ⑬ Bolt Cap 4 ⑭ Chain (36CM) 2 Before Beginning Assembly: Noble house Home Furnishings LLC 2 OF 5
Overview Step 1 1.1) Insert and Align Bed Supporting Bar(A), Supporting Bar(B), and Legs(C), into Metal Connections(E). Attach Bed Supporting Bar(A), Supporting Bar(B), and Legs(C), to Metal Connections(E) using Bolts(⑪) and Wing Nuts(⑩) with Allen Key(⑨). 1.2) Insert Bolts(①) into Bed Supporting Bars(A) and attach using Ring Nuts(②). 1.3) Attach Eye Bolts(③) to Bed Supporting Bar(A) using Nuts(⑦) and Washers(⑧) with Handle(⑤) and Wrench(⑥).
Step 2 2.1) Attach Hammock(F) to Bed Supporting Bar(A) using Carabiners(④) and Chains(⑭). 2.2) Attach Bolt(⑬) and Ring Bolt(⑫) to Hammock(F) using Allen Key(⑨). 2.3) Connect Hammock(F) to Bed Supporting Bar(A) using Safety Lines(D). Tighten all Bolts fully in a sequential manner. Step 3 Your Wooden Stand with Hammock is ready for use. This Wooden Stand with Hammock can only be used on a flat, level surface. Please be careful when getting on and off the Wooden Stand with Hammock.
Noble house Home Furnishings LLC 5 OF 5
