Instructions / Assembly

Step 1

Step 2

Step 3

Attach the Right Armrest(C) to Backrest(A) using Bolts(H) and Washers(L) with Allen Key(G).

DO NOT FULLY TIGHTEN THE BOLTS.

Attach Seat Panel(D) to Backrest(A) using Bolts(I) and Washers(L) with Allen Key(G).

DO NOT FULLY TIGHTEN THE BOLTS.

ATTENTION: Occationally some of the PE Wicker shifts and covers the mounting positions

preventing easy assembly; The PE Wicker should never be cut, but moved away from the

mounting positions.

Overview

This Barstool has multiple parts and may require up to 30 minutes to assemble.

To give you an overview of the Barstool parts, the above picture is to help you put the various parts

into perspective. Please read through the instructions herebelow to familiarise yourself with the

parts and steps before assembly.

Open the carton and place all the parts onto a clean, non-marring surface.

Place Backrest(A) on the ground, as shown in picture above.

FRONT FACING

Backrest(A)

Right Armrest(C)

Left Armrest(B)

Seat Panel(D)

Front Foot Rest(E)

Back Foot Rest(F)