Instructions / Assembly

ManualsBrandsNoble House ManualsChaise LoungesGray New Velvet Tufted Chaise Lounge

Label Picture Description QTY

A Chaise Seat 1

B Chaise Back 1

C Leg 4

D Pillow 1

Label Picture Description QTY

①

Bolt （M8*60MM）

②

Spring Washer 6

Caution :You must read this before you proceed

Chaise

Noble House Home Furnishings LLC 1 of 5

Summary of content (5 pages)

PAGE 1
Caution :You must read this before you proceed Chaise Label Description QTY A Chaise Seat 1 B Chaise Back 1 C Leg 4 D Pillow 1 Description QTY ① Bolt （M8*60MM） 6 ② Spring Washer 6 Label Picture Picture Noble House Home Furnishings LLC 1 of 5
PAGE 2
③ Flat Washer 6 ④ Washer Rings 7 ⑤ Allen Key 1 Before Beginning Assembly: OVERVIEW Chaise Seat(A) Chaise Back (B) Pillow (D) Leg (C) FRONT FACING Leg (C) Leg (C) This Chaise has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chaise parts, the above picture is to help you put the various Chaise parts into perspective. Please read through the instructions to familiarise yourself with the parts and steps before assembly.
PAGE 3
Step 1 Chaise Seat(A) Inner Box Position the Chaise Seat(A) facedown on a clean, non-marring surface. Unzip the pouches and remove the Chaise Back(B)、 Legs(C)、 Pillow(D) and Hardware(①, ②，③，④，⑤) from the inner box CAUTION: The Chaise and it's parts are large and heavy, always have two or more adults assist you when moving and or lifting these.
PAGE 4
Install the Leg (C)onto the Chaise Seat(A) and Chaise Back(B) by placing a Washer Ring(④) onto the stem.Insert the threaded stem into the threaded hole at each corner of the bottom of the Chaise Seat(A) and Chaise Back(B). Tighten the Leg by turning clockwise,as shown. Repeat the same steps to install the remaining 3 legs. Step 4 Add or remove Spring Washers where needed to achieve stability. Note:The use of Washer Ring (④) are OPTIONAL and is especially useful to help alleviate slight wobbleness.
PAGE 5
Noble House Home Furnishings LLC 5 of 5