Assembly Instructions Caution : You must read this before you proceed. Swivel Barstool CAUTION : This barstool is NOT a TOY. Keep your child / children at bay in the process of assembly.
No. Picture Description Qty Chair Seat 1 Iron Plate 1 Chair Leg base 1 Description Qty D Bolts(M8*20mm） 5 E Washers ( 8mm ) 5 F Springs Washers ( 8mm) 5 H Spanner 1 A B C No.
Step 1 Place all parts on a clean soft surface. Step 2 Attach the Iron Plate(B) to the underside and base of the Chair Seat(A). Align the holes on the bottom of the Chair seat(A) with the holes on the Iron Plate(B). Using the Spanner(H), proceed to attach the Iron Plate(B) to the Chair Seat(A) with Bolts(D), Flat Washers(E) and Springs Washers(F). Do not over tighten yet.
Step 3 Attach the Chair Seat(A) with attached Iron Plate to the Chair Leg Base(C) as pictured above. The Stem from the Iron Plate is to be aligned and fully inserted into the end of the Chair Leg Base Stem. Once into its housing, exert force and weight on the chair seat so as to force the Chair Seat into a locking position into the Chair Leg Base stem. Step 4 Make sure that the Chair Seat and the Chair Leg Base is fully and firmly attached together as one complete piece. The Barstool is ready for use.
OF 5
