Caution : You must read this before you proceed Table Label Description QTY A Table Top 1 B Table Leg 4 Description QTY ① Allen Key 1 ② Bolt (M6*20) 17 ③ Washer 17 Label Picture Picture
Before Beginning Assembly: Overview Table Top (A) Table Leg (B) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 2.1: Align Table Leg(B) to mounting positions on the Table Top(A). Attach Table Leg(B) to Table Top(A) using Bolts(②) and Washers(③) with Allen Key(①). 2.2: Attach the remaining Table Legs(B) to Table Top(A) using Bolts(②) and Washers(③) with Allen Key(①). Do not fully tighten the Bolts. Step 3 Place the Table on a LEVEL SURFACE to check for wobbles. If it wobbles lift the Table to some 30cm to 50cm high from the ground. Keep your feet and toes well away from the drop zone.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.