Instructions / Assembly

ManualsBrandsNoble House ManualsOutdoorsDarius 5-Piece Acacia Wood Round Outdoor Dining Set

CHAIR

CAUTION : This Chair is NOT a TOY.

Keep your child / children at bay in the process of assembly.

For turning the Chair and to prevent damage to the Chair, 02 persons may be needed

to execute this action

CAUTION: You must read this before you proceed

Noble House Home Furnishings LLC

1 of 7

Summary of content (7 pages)

PAGE 1
CHAIR CAUTION: You must read this before you proceed CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly.
PAGE 2
No. Picture Description Qty A Backrest Panel 1 B1 Right Leg Frame 1 B2 Left Leg Frame 1 C Seat Panel 1 D Cross bar 2 No.
PAGE 3
Before Beginning Assembly: OVERVIEW Backrest Panel (A) Right Leg Frame (B1) Seat Panel(C) Left Leg Frame (B2) Cross bar(D) FRONT FACING This Chair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Chair, the above picture to assemble to help you put the various parts into perspective. Please read through the instructions here below to familiarise the parts and steps before assembly.
PAGE 4
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 2.1) Position Backrest Panel (A) and 2 Cross Bar (D) to Left Leg Panel (B2) as shown in picture above 2.2) Attach Right Leg Panel (B1) to 2 Cross Bars (D) by using 2 Screw(④)+Allen Key(①) Then, secure Right Leg Panel (B1) to Backrest Panel (A) by using Screw (③)+Allen Key (①) Do not fully tighten the Screws.
PAGE 5
Step 3 With assistance from your adult partners, turn the Chair into the other side. Repeat the same process of step 2.2 to secure Left Leg Panel (B2) with Backrest Panel (A) and 2 Cross Bars (D) Do not fully tighten the Screws. Step 4 Seat Panel (C) Turn the chair in right side up Place Seat Panel (C) onto the chair as shown above.
PAGE 6
Step 6 If wobble Test again 30-50cm Place the Chair right side up on a LEVEL SURFACE to see if it wobbles. If it wobbles, lift the Chair 30cm to 50cm high from the ground. Keep your feet and toes well away from the drop zone. Drop the Chair freely and vertically with all four legs, hitting the ground at the same time. This Drop Test will help to ensure that all the Bolts, Screws and gaps reach full alignment status. Test again for evenness on a LEVEL SURFACE.
PAGE 7
Noble House Home Furnishings LLC 7 of 7