Caution : You must read this before you proceed Ottoman Label Description QTY A Seat Panel 1 B Leg 2 C Seat Cushion 1 Description QTY ① Bolt (M6*30MM) 5 ② Bolt (M6*25MM) 5 Label Picture Picture
③ Allen Key Before Beginnin g Assembly : 1 *5 *5 Overview Seat Cushion(C) Seat PanelA) Leg(B) FRONT FACING This Ottoman has multiple parts and may require up to some 30minutes to assemble.To give you an overview of the Ottoman parts, the above picture is to help you put thevarious parts into perspective. Please read through the instructions below to familiariseyourself with the parts and steps before assembly.
Step 1 Step 1.1 Step 1.2 Step 1.3 Open the carton and place all the parts onto a clean, non-marring surface. Step 1.1 Insert Seat Panel((A) to Leg(B) as shown above Step 1.2 Attach Seat Panel((A) to Leg(B) using Bolts(①) with Allen Key(③) as shown above. Step 1.3 Attach Seat Panel((A) to Leg(B) using Bolts(②) with Allen Key(③) as shown above. Step 2 Step 2.1 Step 2.2 Step 2.3 Step 1.1 Insert Seat Panel((A) to Leg(B) as shown above Step 1.
Step 3 Then, with the assistance from an adult partner, stand the Chair upright.Adjust the Preinstalled Levellers until the Ottoman is level with the ground.To adjust the Levellers, with the assistance from an adult partner, tilt the Chair to rest ontwo feet.Adjust the levellers to the desired height to avoid wobbles. Step 4 C Place the Seat Cushion(U) on the ottoman. Your Ottoman is ready for use. This Ottoman can only be used on a flat, level surface.
