Caution :You must read this before you proceed LOVESEAT Label Picture Description QTY A Chair Base 1 B Front Leg 2 C Back Leg 2 Noble house Home Furnishings LLC 1 of 5
Label Picture Description QTY ① Plastic Washer 7 ② Rubber Washer 2 Before Beginning Assembly: Chair Base (A) Front Leg (B) Back Leg (C) FRONT FACING Noble house Home Furnishings LLC Front Leg (B) 2 of 5
This LOVESEAT has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the LOVESEAT parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Position the chair on its back,as shown. Unzip to open pouch and remove the 4 wooden legs and hardware bag, close the pouch.
Step 3 Chair Base (A) Front Leg (B) Rubber Washer(②) Plastic Washer(①) Front Leg (B) Back Leg (C) Install the Back Leg (C) into the bottom of the Chair Base(A) by placing the Plastic Washer (①) and Rubber Washer (②) onto the threaded stem. And then insert the threaded Stem into the threaded Mounting Position at each Corner of the Bottom of the Chair Base (A). Tighten by turning the Legs clockwise. Repeat the same steps to install the three remaining legs.
Noble house Home Furnishings LLC 5 of 5
