Caution : You must read this before you proceed Swivel Chair Label Picture Description QTY A Right Armrest 1 B Left Armrest 1 C Seat 1 D Backrest 1 E Swivel Plate (Pre-attached Levellers) 1 F Seat Cushion 1 G Back Cushion 1 Noble House Home Furnishings LLC Page 1 OF 6
Label Picture Description QTY ① Bolt (M6*40mm) 15 ② Washer 15 ③ Allen Key 1 Before Beginning Assembly: Overview Backrest (D) Back Cushion (G) Righ Armrest (A) Seat Cushion (F) Left Armrest (B) Seat (C) Swivel Plate (E) This Swivel Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Swivel Chair parts, the above picture is to help you put the various parts into perspective.
Step 1 Dowel Open the carton and place all the parts onto a clean, non-marring surface. Place the Right Armrest(A) with its inside facing skywards. Align the Backrest(D) with Right Armrest(A), by inserting the Dowel on the Backrest(D) into the mounting position of the Right Armrest(B) as shown above. Attach Backrest(D) to Right Armrest(A) using Bolts(①), and Washers(②) with Allen Key(③). Do not fully tighten the Bolts.
Step 3 Dowel With the help of an adult partner, stand the Chair up. Align the Left Armrest with Backrest(D) and Seat(C) by inserting the Dowel on the Backrest(D) into the Left Armrest(B). Attach Left Armrest(B) to Seat(C) and Backrest(D) using Bolts(①), and Washers(②) with Allen Key(③). Do not fully tighten the Bolts. Step 4 With the help of your adult partner, place the Chair on a level surface to check for wobbles. If it wobbles, lift the Chair some 30cm to 50cm high from the ground.
Step 5 With the help of your adult partner, lay the Chair down on a clean, non-marring surface. Place the Swivel Plate(E) between the inner bottom bars of the Left Armrest(B) and Right Armrest(A). Attach the Swivel Plate(E) to Left Armrest(B) and Right Armrest(A) using Bolts(①), and Washers(②) with Allen Key(③). Please attach the Swivel Plate(E) to the Armrest on the floor first. Then, with the help of your adult partner, turn the Chair over onto the other Armrest and assemble the Swivel Plate(E).
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.