Assembly Instructions Caution : You must read this before you proceed Power Recliner Chair Parts List Label Description QTY (pc) A Chair Backrest 1 B Chair Base With Footrest 1 C Power Cord with transformer 1 Noble house Home Furnishings LLC Picture Page 1 of 6
D Left Wing 1 E Right Wing 1 Assembly Preparation Before Beginning Assembly: Assembly Steps Parts Introduction Right Wing(E) Chair Backrest(A) Left Wing(D) Chair Base With Footrest(B) FRONT FACING This product has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the product parts, the above picture is to help you put the various parts into perspective.
Take out 2 non-woven bags with two Wings inside from the bottom of the armrest. Then take out the Wing from non-woven bag. Position the Chair Backrest(A) on it's right side. Align the mounting brackets of the Left Wing(D) with those on the left side of Chair Backrest(A). Then slide Left Wing(D) forward by hand to make sure it locks into the position as shown in the picture. Repeat the above to Right Wing (E).
Step 6 Make sure all parts are connected and securely locked into position. Plug into a socket into position on the wall or any other place. Now your Recliner Chair is ready for use.
User Instructions. Push Back Chair Please read the Instruction Manual below carefully before use. Supervise children,when in use of this Power Recliner. Warning Do not allow children to play on the chair. Always leave the chair in an upright and closed position after use! Keep hands and feet clear of the footrest mechanism and ANY gaps. Only the occupant should operate the chair. To get into a open position-To press the front button of switch. Sit into the seat.
Noble house Home Furnishings LLC Page 6 of 6