Use and Care Manual
Step 3
Step 4
Step 5
Attach the table leg with pre-attached Levellers(B) to the table top(A)
using washers(②),spring washers(③),and nuts(④) with spanner(⑩).
DO NOT OVERTIGHTEN.
Loosely attach the round support (C) to Table Leg with pre-attached
Levellers(B) with nuts(⑧), washers(⑦), spring washers(⑥) and
bolts(⑤), using the spanner(⑩).
Tighten all these Nuts and Washers in a sequential manner.
DO NOT OVERTIGHTEN.
Repeat step 3, attaching the remaining 3 legs to the Table top(A).
At this stage, only loosely tighten the Bolts.
A
B
④
③
②
④
③
②
Noble house Home Furnishings LLC
Page 4 OF 6