Instructions / Assembly

Step 3

Next, place the chair onto the side of a table as seen in Picture 1.

You will now have the chair bottom and all 4-le

s facin

wards.

You

will

now

have

the

chair

bottom

and

all

4 legs

facing

skywards.

Insert each front leg completely vertically into each seat frame

corner.

PRESS FIRMLY DOWN with your hand until there is no gap.

WARNING!! DO NOT POSITION THE FRONT LEG AS SHOWN

IN PICTURE 2 .

THIS PICTURE SHOWS THE CHAIR BACK STAYS AGAINST

THE GROUND and THE FRONT LEGS HORIZONTAL IN MIDAIR.

Now tighten the bottom bolt first, then the bolt on the top by using 4

bolts(b)+4 flat washers(e)+4 spring washers (d).

DO NOT tighten the top bolt first.

WARNING!! DO NOT OVER TIGHTEN. OVER TIGHTENING

COULD LEAD TO DAMAGE OF THE PRODUCT.

TIGHTEN ONLY UNTIL SECURE AND STABLE.

5 of 7