Instructions / Assembly

ManualsBrandsNoble House ManualsDesks44 in. Rectangular Dark Oak 2 Drawer Computer Desk with Built-In Storage

CAUTION : This Table is NOT a TOY. Keep your child / children at bay in the process of

assembly.

For turning the Table and to prevent damage to the Table, 02 persons may be needed to

execute this action.

Noble House Home Furnishings LLC Page 1 of 8

Table

CAUTION: You must read this before you proceed.

Please look in the Table Top for hardware packs.

Summary of content (8 pages)

PAGE 1
CAUTION: You must read this before you proceed. Please look in the Table Top for hardware packs. Table CAUTION : This Table is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Table and to prevent damage to the Table, 02 persons may be needed to execute this action.
PAGE 2
Description Qty A Table top 1 B Left Leg Panel 1 C Right Leg Panels 1 D Support Bar 1 Description Qty ① Bolts (M6x15mm) 13 ② Screws (M6x40mm) 5 No. No.
PAGE 3
Before Beginning Assembly: Read the instructions, cover to cover. Have 2 adults on hand for assembly. Do not assemble on flooring or carpet. Assemble on a clean non-marring surface (packing foam). Save all packaging until finished. Table Top (A) OVERVIEW Right Leg Panel (C) Left Leg Panel (B) Support Bar (C) FRONT FACING This Table has multiple parts and may require up to some 30 minutes to assemble.
PAGE 4
Step 2 2.2 2.1 Step 2.1: Place the Table Top (A) facedown, onto a clean, soft surface to avoid any scratches or damages to the product. Step 2.2: Position the Leg Panel (B) into the Table Top (A) as shown in picture above. Then affix Left Leg Panel (B) to Table Top (A) by using Bolt (①), Flat washer (③) and Allen Key (m). Step 2.3: Repeat the same process 2.2 to affix Right Leg Panel (C) to Table Top (A). DO NOT FULLY TIGHTHEN THE BOLTS Step 3 3.1 3.2 Step 3.
PAGE 5
Step 5 Turn the Table right side up Place the Table on a LEVEL SURFACE to see if it wobbles. If it wobbles, lift the Table to some 30cm to 50cm height from the ground. Keep your feet and toes well away from the drop zone. Drop the Table freely and vertically with the four legs, hitting the ground, at the same time. This Drop Test will help to ensure that all the screws and gaps to all reach full alignment status. Test again for evenness on a LEVEL SURFACE.
PAGE 6
Step 7 Step 8 Noble House Home Furnishings LLC Page 6 of 8
PAGE 7
Step 9 Step 10 Noble House Home Furnishings LLC Page 7 of 8
PAGE 8
Noble House Home Furnishings LLC Page 8 of 8