Caution: You must read this before you proceed.
Label Description QTY A Chair 1 B Front Wooden Leg 2 C Back Wooden Leg 2 Description QTY Washer Ring 7 Label Picture Picture 1 Before Beginning Assembly: 2 of 4
Step 1 Position the Chair on its back, as shown. Unzip to open and remove the 4 wooden legs. Close the pouch. Step 2 Use of Washer Ring to alleviate wobbleness and to achieve evenness. Install the Front Wooden Leg (B) into the Chair front by putting a Washer Ring (optional ) on the threaded stem and then insert the threaded stem into the threaded mounting position at the corner of the bottom of the Chair. Tighten by turning leg clockwise. Repeat the same procedure to install the other 3 remaining legs.
of 4
