Caution : You must read this before you proceed Chaise Lounge Label Description QTY A Seat Panel (With Adjustable Back) 1 B Leg 2 Description QTY ① Bolt (M6*20MM) 9 ② Washer 9 ③ Allen Key 1 Label Picture Picture
Before Beginnin g Assembly : *9 *9 Overview Seat Panel (A) Leg (B) FRONT FACING This Chaise Lounge has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chaise Lounge parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 B B A Open the carton and place all the parts onto a clean, non-marring surface. Place the Seat Panel(A) facedown. Attach Leg(B) to Seat Panel(A) using Bolts(①) and Washers(②) with Allen Key(③) as shown above. Do not fully tighten the Bolts.
Stand the Chaise Lounge up. Place the Chaise Lounge on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and carefully sit onto the Chaise Lounge. This will help to align all parts at all joints.Then get off the Chaise Lounge, and in a sequential manner, proceed to tighten all Bolts. When tightening the Bolts, tighten sequentially. DO NOT tighten any Bolt fully and then move on to the next one. This may cause the frame to warp.
Questions & Answers about Proposition 65 • What is Proposition 65? Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. These chemicals can be in the products that Californians purchase, in their homes or workplaces, or that are released into the environment.