Caution : You must read this before you proceed DINING CHAIR Picture Label Picture Description QTY A Leg Frame 1 B Chair Body 1 Page 1 OF 5
Label Picture Description QTY ① Bolt (m6x20mm) 3 ② M6 Flat washer 5 ③ Nut 3 ④ Nut Cap 3 ⑤ Allen Key 1 ⑥ Spanner 1 Before Beginning Assembly: Page 2 OF 5
Overview: Chair Body(B) Leg Frame (A) FRONT FACING This Dining Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Dining Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Front Bar Carefully place the Chair Body (B) upside down on a clean, non-marring table with assistant from second adult.
Step 2 Back Bar Attach back bar of the Leg frame (A) to Chair Body (B) by using Flat washer (②) and Bolts (①), tight them by Allen Key (⑤). Do not fully tighten the Bolts. Step 3 Stand the Chair up and place on flat, level surface. Carefully and gently sit onto the Chair. This will help properly align all parts at all joints and remove any gaps. Carefully get off the Chair and gently turn it over. Tighen all Bolts at all joints. When tightening the Bolts, tighten sequentially.
Page 5 OF 5
