CORNER CHAIR Caution : You must read this before you proceed CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Chair and to prevent damage to the Chair 02 persons may be needed to execute this action.
Label Description QTY A Seat Panel 1 B Backrest Panel 1 C Legs 4 D Seat Cushion 1 E Back Cushion 1 Description QTY Label Picture Picture j Screws (M6x65mm) 9 k Bolts (M6x40mm) 5 l Sleeve Nut M6x15 5 m Allen Key 2 Noble House Home Furnishings LLC Page 2 of 7
Before Beginning Assembly: Overview Back Cushion (E) Backrest Panel (B) Seat Cushion (D) Seat Panel (A) Legs (C) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 2.1 2.2 2.1) With assistance from your adult partners, turn the Seat panel (A) up side down as shown in picture above. 2.2) Attach the Leg (C) into the housing on the Seat panel (A) Then affix them by using Screws (①) and Allen Key (④) as shown in picture above. Repeat the same process to attach the 3 remaining Legs (C) into the Seat Panel (A).
Step 3 3.2 3.3 3.1 3.1) With assistance from your adult partners, turn the Seat panel (A) right side up. 3.2) Attach the Backrest (B) to Seat panel (A) as shown in picture above. 3.3) Affix the Backrest (B) to Seat panel (A) by using Bolts (②), Sleeve nut (③) and Allen Key (④) ④ as shown in picture above. Do not fully tighten the Bolts. Step 4 EXERT pressure, floorwards, onto the Seat. This pressure will help the Legs and Seat panel reach alignment at all joints. Check for wobbles.
Step 5 Place Seat Cushion (D), Back Cushion (E) on the chair as shown in picture above. Secure the velcro straps as shown in diagrams. Your Chair is ready for use. This Chair can only be used on a flat, level surface.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and Not for commercial use. For residential use only .
LOVESEAT - LEFT Caution: You must read this before you proceed CAUTION : This Loveseat is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Chair and to prevent damage to the Chair 02 persons may be needed to execute this action.
Label Description QTY A Seat Panel 1 B Backrest Panel 1 C First legs 2 D Second legs 2 E Seat Cushion 1 F Back Cushion 1 Description QTY Label Picture Picture ① Long Bolts (M8 x 60mm) 9 ② Flat Washers (M8xD2mmm) 9 ③ Short Bolts (M6x40mm) 7 ④ Sleeve Nut M6x15 7 ⑤ Allen Key 2 Noble House Home Furnishings LLC Page 2 of 8
Before Beginning Assembly: Overview Back Cushion (F) Seat Cushion (E) Backrest Panel (B) Seat Panel (A) Leg (D) Leg (D) Leg (C) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 2.1 2.2 2.3 2.1) With assistance from your adult partners, turn the Seat panel (A) up side down as shown in picture above. 2.2) Attach the First Leg (C) to the Seat panel (A) by using Long bolts (①), Flat washer (②) and Allen Key (⑤) as shown in picture above. 2.3) Repeat the same process to attach the remaining First Leg (C) into the diagonal position in Seat Panel (A).
Step 3 Attach the Second Leg (D) to the Seat panel (A) by using Long bolts (①), Flat washer (②) and Allen Key (⑤) as shown in picture above. Repeat the same process to attach the remaining Second Leg (D) into the diagonal position in Seat Panel (A). Do not fully tighten the Bolts. Step 4 4.2 4.1 4.3 4.1) With assistance from your adult partners, turn the Seat panel (A) right side up. 4.2) Attach the Backrest (B) to Seat panel (A) as shown in picture above. 4.
Step 5 EXERT pressure, floorwards, onto the Seat. This pressure will help the Legs and Seat panel reach alignment at all joints. Check for wobbles. In a sequential manner, gradually tighten all Bolts, Screws until evenly secured. Inspect the Chair and make sure all parts are adequately connected. Step 6 Place Seat Cushion (E), Back Cushion (F) on the chair as shown in picture above. Secure the velcro straps as shown in diagrams. Your Chair is ready for use.
Step 7 Note: This is optional step in case we want to connect all Corner chair and Loveseats in a set together and should be done before placing cushion With assistance from your adult partners, up side down the chairs and using pre-fixed clip to connect the chairs together Noble House Home Furnishings LLC Page 7 of 8
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and Not for commercial use. For residential use only .
COFFEE TABLE Caution: You must read this before you proceed CAUTION : This Table is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Table and to prevent damage to the Table, 02 persons may be needed to execute this action.
Label Description QTY A Table Top 1 B Legs 4 Description QTY Label Picture Picture ① Bolts (M8 x 60mm) 9 ② Flat Washers (M8xD2mmm) 9 ③ Allen Key 1 Before Beginning Assembly: Noble House Home Furnishings LLC Page 2 of 5
Overview Table top (A) Legs (B) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
Step 2 2.2 2.1 2.1) Turn the Table top (A) up side down as shown in picture above. 2.2) Attach the Leg (B) to Seat panel (A) by using Bolts (①), Flat washer (②) and Allen Key (③) as shown in picture above. Repeat the same process to attach the 3 remaining Legs (B) into the Table Top (A). Do not fully tighten the Bolts. Step 3 Turn the Table back to normal flat ground EXERT pressure, floorwards, onto the Table. This pressure will help the Legs and Table Top reach alignment at all joints.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the To obtain the longest lifespan of your outdoor products, avoid Not for commercial use. For residential use only . Stains Stainsmay maybe beremoved removed with withmild mildsoap soapsolution solutionand anddamp dampcloth cloth..
