Warnings: You must read this before you proceed.
Part NO.
Before Beginning Assembly: Unpack all the parts for a clear overview. Step 1 Unpack all components carefully from the package. Put the Fire Pit Body on a hard, level and non-combustible surface.
Step 2 Insert Bowl Handles into the holes on the inside Fire Bowl wall, as depicted in the picture. Step 3 Put the Fire Bowl into the Fire Pit opening as shown in Step 3 above. Make sure it sits evenly in the frame housing.
Step 4 Take out the Handles after the Fire Bowl is placed inside the Fire Pit Main Housing. Place the Log Grill into the Fire Bowl. Step 5 Put the Spark Safeguard Screen onto the top opening of the Fire Pit Body and make sure it sits into it evenly. The Firepit is ready for use. CAUTION: Firepit will become hot during use and remain hot after use.
