Instructions / Assembly

No. Picture Description Qty

Backrest Panel 1

Chair Seat Panel 1

Right Legs with Arm and Pre-

attached Bolts for Seat Panel

and Leveller

Left Legs with Arm and Pre-

attached Bolts for Seat Panel

and Leveller

CAUTION : This chair is NOT a TOY.

Keep your child / children at bay during the assembly process.

Assembly Instructions

Caution : You must read this before you proceed.

ARCH MESH CHAIR

1 OF 4

PAGE 1
Assembly Instructions Caution : You must read this before you proceed. ARCH MESH CHAIR CAUTION : This chair is NOT a TOY. Keep your child / children at bay during the assembly process. No.
PAGE 2
No. Description Qty Washer (8mm) 8 Spring Washer (8mm) 8 Nut (8mm) 8 J Rubber Cap 4 G Spanner 1 E Picture Before Beginning Assembly: Step 1 Place the Chair Seat Panel(B) into the pre-attached bolts of the Left Legs(D)Panel using Washers, Spring Washers and Nuts(E, with Spanner(G). DO NOT overtighten at this stage.
PAGE 3
Step 2 Then attach the Backrest Panel(A) to the to Left Legs(D) Backrest Panel using Washers, Spring Washers and Bolts(E), with Spanner(G). DO NOT overtighten at this stage. Step 3 Repeat the same assembly process for the RIGHT leg. DO NOT overtighten at this stage. Step 4 Stand the chair upright. Adjust the Pre-attached Levellers on the Chair Legs until the chair is level with the ground. Now, in a sequential manner, fully and securely tighten all screws and bolts at all joints.
PAGE 4
OF 4