Instructions / Assembly

No. Picture Description Qty

BasketTop 1

Basket Middle 1

Base Plate 1

Headrest Pillow 1

Pillow 1

Screw 11

Nut with cap 7

Allen Key 1

Spanner 1

Armrest 2

Iron Stand (Separate

Package)

CAUTION : Do Not Swing on or in chair. This could cause the product to tip over resulting in possible

injury.

This Chair Basket is NOT a TOY.

Keep your child / children at bay during the assembly process.

Assembly Instructions

Caution : You must read this before you proceed.

CHAIR-BASKET

Chair Basket intended for use with Iron Stand

1 OF 4

PAGE 1
Assembly Instructions Caution : You must read this before you proceed. CHAIR-BASKET CAUTION : Do Not Swing on or in chair. This could cause the product to tip over resulting in possible injury. This Chair Basket is NOT a TOY. Keep your child / children at bay during the assembly process. No.
PAGE 2
Before Beginning Assembly: Step 1 Unpack and place all parts on a clean, soft surface. Step 2 Put the parts Basket Middle(B) and Base Plate(C)as show. Align the hole of Basket Middle(B) and Base Plate(C) ,using Screw(F)and Nut(G) with Allen Key(H) and Spanner(I). Screw the middle hole first, then screw the top and bottom hole respectively. DO NOT OVERTIGHTEN. Step3 Repeat Step2 ,attach BasketTop(A) to Basket Middle(B) ,using Screw(F) and Nut (G) with Allen Key (H) and Spanner(I). DO NOT OVERTIGHTEN.
PAGE 3
Step 4 Place the hanging basket on its side. Attach one Armrest(J) to the basket using Screws(F) and Allen Key(H). In the same way, proceed to assemble the other armrest by using Screws (F) and Allen Key (H). Now, in a gradual and sequential manner, proceed to fully and securely tighten all Bolts at all joints. Step 5 Tied the Headrest(D) to Chair-Basket in the upper part, and place Pillow(E) into the Basket.
PAGE 4
OF 4