Assembly instructions TAHOE CAST BENCH CAUTION : This chair is NOT a TOY. Keep your child / children at bay in the process of assembly.
Assembly Preparation Before Beginning Assembly: Parts list NO. Picture Description QTY A Backrest Panel 1 B Chair Seat Panel 1 C Right Arm with Pre-attached Leg Levellers 1 D Left Arm with Pre-attached Leg Levellers.
Hard ware E F G Bolts(8*32mm) 5 Washers(8mm) 5 Spring Washers(8mm) 5 Nuts(8mm) 5 Bolts(6*30mm) 5 Washers(6mm) 5 Spring Washers(6mm) 5 Nuts(6mm) 5 Nut Caps(M6) 5 Spanner 2 H I Assembly Step Unpack and place all parts on a clean soft surface.
B I A H F E G I C Align the mounting positions on the Chair Seat Panel (B) with the mounting positions on the Right Arm (C) . Insert the bolts from the mounting positions on the Right Arm (C) to the mounting positions on Chair Seat Panel (B) Put Flat washers+ Spring washers + Nuts(F) to the Blots(E), partially tighten all bolts into position. Once all Bolts and Nuts are in postion, use one Spanner (I) to hold the Bolt, and the other Spanner to turn lock the Nut.
OF 5
