CAUTION : You must read this before you proceed Recommended Umbrella Diameter : 59inches to 70inches Umbrella Base Picture Umbrella Base Weight : 15 kgs 1 / 4
Label Picture Q T 1 p c 1 p 1 p1 Description A Umbrella Base B Washer C Locking Bolt D Decorative Ring E Support Pole F Adjustable Screw G Cap H Adapter for 35mm pole I Adapter for 38mm pole p c 1 p 1 p c 1 p 1 p 1 p Before Beginning Assembly: WARNING : AVOID CHOKING / CHOKING HAZARDS : Do not allow children to play with plastic wraps and / any small parts in this package. Notice: As a safety precaution, when umbrella is not in use please turn down umbrella.
Step 1 This is a 2-person team assembly product. Tilt the Umbrellas Base to its side as pictured. Put the Locking Bolt (C) through the base from the hole on the bottom. Screw the Washer(B)to fastening the Locking Bolt(C). Adding the Decorative Ring (D) onto the Washers (B). Screw the Support Pole (E) onto the base. Step 2 Screw the Adjustable Screw (F) into the Support Pole(E). Step 3 For the Umbrela Pole with diameter as 35mm, use Dia. 35mm Adapter (H) & Dia.
/ 4