CAUTION : You must read this before you proceed Recommended Umbrella Diameter : 80inches to 86inches Umbrella Base Picture Umbrella Base Weight : 30 kgs 1 / 4
Label Picture Description QTY A Umbrella Base 1pc B Washer 1pc C Locking Bolt 1pc D Decorative Ring 1pc E Support Pole 1pc F Adjustable Screw 1pc G Cap 1pc H Adapter for 38mm pole 1pc I Adapter for 48mm pole 1pc Before Beginning Assembly: WARNING : AVOID CHOKING / CHOKING HAZARDS : Do not allow children to play with plastic wraps and / any small parts in this package. Notice: As a safety precaution, when umbrella is not in use please turn down umbrella.
Step 1 This is a 2-person team assembly product. Tilt the Umbrellas Base to its side as pictured. Put the Locking Bolt (C) through the base from the hole on the bottom. Screw the Washer(B)to fastening the Locking Bolt(C). Adding the Decorative Ring (D) onto the Washers (B). Screw the Support Pole (E) onto the base. Step 2 Screw the Adjustable Screw (F) into the Support Pole(E). Step 3 For the Umbrela Pole with diameter as 38mm, use Dia. 38mm Adapter (H) & Dia.
/ 4