Assembly Instructions Caution : You must read this before you proceed BARSTOOL Part List Label Picture Description QTY A Seat 1 B Left Leg 1 C Right Leg 1 Noble House Home Furnishings LLC Page 1 OF 5
D Front Foot Rest 1 E Back Foot Rest 1 F Seat Cushion 1 Description QTY ① Bolt(M6*20MM) 13 ② Washer 13 ③ Allen Key 1 ④ PE Cap 9 Hardware Label Picture Assembly Preparation Before Beginning Assembly: Noble House Home Furnishings LLC Page 2 OF 5
Assembly Steps Overview Back Foot Rest(E) This Barstool has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Barstool parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface.
Step 2 Place the Front Foot Rest(D) and Back Foot Rest(E) between the Left Leg(B) and Right Leg(C). Attach Front Foot Rest(D) and Back Foot Rest(E) to Left Leg(B) and Right Leg(C) using Bolts(①) and Washers(②) with Allen Key(③) as shown in the picture. Tighten all Bolts at all joints sequentially. DO NOT tighten any Bolt fully and then move onto the next one. This may cause the frame to warp. Step 3 Place the Barstool on a LEVEL SURFACE to check for wobbles.
Step 4 Put the PE Cap (④ ) on the screw,as the picture above. Step 5 Put the Seat Cushion(F) on the Barstool. Your Barstool is ready for use. This Barstool can only be used on the flat, level surface. Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture.