Assembly Instructions Caution : You must read this before you proceed Bench Part List Label Picture Description QTY 1 Bench Top 1 2 Bench Legs 2 3 Rail 1 Description QTY A Screw (M6 *16MM) 13 B Spring washer (M6) 13 C Flat Washer(M6 *16MM) 13 D M6 Allen key 1 Hardware Label Picture Page 1 OF 5
Assembly Preparation Before *Before beginning assembly of product, make sure all parts are Beginning present. Compare parts withpackage contents list. If any parts is Assembly: missing or damaged,do not attempt to assemble the product. Assembly Steps OVERVIE W Bench Top(1) Leg(2) Rail (3) This Bench has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Bench parts, the above picture is to help you put the various Bench parts into perspective.
Step 1 Hardware Used A A：M6 Screw B 2 C B：Spring Washer 1 C：Flat Washer(M6 *16MM) Position the bottom of the Bench top(1) as shown. And then insert the Legs(2) into the mounting position of Bench Top(1). Attach the Legs(2) by using M6 Screw(A) + Spring Washer(B)+ Flat Washer (C), onto metal plate of Legs(2), with Allen Key(E). Do not over tighten Screws(A) while assembling the Legs(2) in order to adjust the Legs(2) as needed while assembling and make sure you follow the steps fully.
Step 3 Make sure all parts are connected and securely locked into position. Your Bench is ready for use. This Bench can only be used on a flat, level surface.
Page 5 OF 5
