Caution : You must read this before you proceed Shelf Label Picture Description QTY A Top of Shelf 1 B Left Panel 1 Page 1 OF 9
C Right Panel 1 D Top Back Panel 1 E Bottom Back Panel 1 F Shelf 2 G Bottom Plate 1 H Feet Cap 4 Description QTY I Bolt M6*45mm 21 J Bolt M8*20mm 5 K Spring washer 25 M Allen Key 1 Label Picture Page 2 OF 9
Before Beginning Assembly: Page 3 OF 9
Overview Top of Shelf(A) Top Back Panel(D) Shelf(F) Right Panel(C) Left Panel(B) Bottom Back Panel(E) Bottom Plate(G) Feet Cap (H) This Shelf has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Shelf parts, the above picture is to help you put the various parts into perspective. Please read through the instructions here below to familiarise yourself with the parts and steps before assembly.
Step 2 Repeat Step 1 attaching the Right Panel(C) to the Shelf Top(A). DO NOT FULLY TIGHTEN THE BOLTS. Step3 Attach the Top Back Panel(D) between the side panels using hardware(K, I) with Allen Key(M). The bolts mounting position on long side of the Top Back Panel(D) should be on the upside. DO NOT FULLY TIGHTEN THE BOLTS.
Step 4 Attach the Bottom Back Panel(E) between the side panels using hardware(K, I) with Allen Key(M). DO NOT FULLY TIEHTEN THE BOLTS. Step 5 NOTE: Please have a second adult help you perform the Step 5 & Step 6. Attach the Bottom Plate(G) to the Bottom Back Panel(E) using hardware(K, I) with Allen Key(M). DO NOT FULLY TIGHTEN THE BOLTS.
Step 6 Attach the Feet Cap(H) to the Bottom Plate(G) using hardware(K, I) with Allen Key(M). Now, in a gradual and sequential manner, proceed to fully and securely tighten all Bolts at all joints. Step 7 To install the Shelves(F), first place the loop attached to the left side of the shelf into the metal peg on the inside of the Left Side Panel(B) as shown in the picture above. Then lower the right side until the loops fit into the pegs on the right side.
Step 8 Repeat Step 7 to install the second Shelf(F). The Shelf is ready for use. The Shelf can only be used on a flat, level surface.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
