Instructions / Assembly

Step 1
Open the carton and place all the parts onto a clean and soft surface.
Unpack all packages of hardware.
Then place Shelf Top(A) facedown on a clean, non-marring surface.
Attach the Left Panel(B) to the Table Top(A) using hardware(K,J) withAllen Key(M).
DO NOT FULLY TIGHTEN THE BOLTS.
Overview
This Shelf has multiple parts and may require up to some 30 minutes to assemble. To give you
an overview of the Shelf parts, the above picture is to help you put the various parts into
perspective. Please read through the instructions here below to familiarise yourself with the
parts and steps before assembly.
Left Panel(B)
Right Panel(C)
Top of Shelf(A)
Top Back Panel(D)
Bottom Back Panel(E)
Shelf(F)
Bottom Plate(G)
Feet Cap (H)
Page 4 OF 9