Caution: You must read this before you proceed.
Before Beginning Assembly: Unpack all the parts for a clear overview. Overview Table Top with Glass (A) Shelf (B) Table Leg (C) This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 2 Align the Table Leg(C) with mounting positions of the Table Top with Glass(A). Attach Table Leg(C) using Bolts(②), and Washers(③) with Allen Key(①). Do not fully tighten the Bolts. Step 3 Step3.2 Step3.1 Step 3.1: Repeat the same assembly process for the remaining three Table Legs(C). Step 3.2: Place the Shelf(B) between the Table Legs(C) as shown above.
Step4 Place the Table on a LEVEL SURFACE to check for wobbles. If it wobbles, apply steady and even pressure down on the Table Top with the help of an adult partner. Adjust the Legs Pre-installed Levellers until the Table is level with the ground. Adjust the levellers to the desired height to avoid wobbles.When the Table is level proceed to tighten all Bolts at all joints. When tightening the Bolts, tighten sequentially. DO NOT tighten any Bolt fully and then move on to the next one.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.