Assembly instructions Caution : You must read this before you proceed. LAUGHLIN KD LOVESEAT FOR SET CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly.
Assembly Preparation Before Beginning Assembly: Parts list NO. Picture Description QTY A Backrest Panel 1 B Chair seat Panel 1 C D Right Arm with pre-attached Levellers Left Arm with pre-attached Levellers.
G Nut Cap 9 H Spanner 1 I Screwdriver 1 Assembly Step Unpack and place all parts on a clean soft surface. Place the Right Arm flat (C) on the ground. Attach Studs (E) with Screwdriver (I) to the contact points on the Right arm. Place Chair Seat Panel (B) and Backrest Panel(A) to the Right arm (C) through the Studs (E). Align the nut hole and attached with Washers and Spring Washers and Nuts (F) with the Spanner(H). Put on the Nut caps(G) DO NOT OVERTIGHTEN, yet.
Attach Studs (E) with Screwdriver (I) to the contact points on the Left arm (D) Place Chair Seat Panel (B) and Backrest Panel(A) to the Left arm (D) through the Studs ((E). ) Align the nut hole and attached with Spring Washers and Washers and Nuts (F) with the Spanner(H). Put on the Nut caps(G) DO NOT OVERTIGHTEN, yet. Turn the Chair rightside. Adjust the pre-installed feet Levellers until the chair is level with the ground. Then, proceed to tighten up all screws and bolts. Your Chair is ready for use.
OF 5