Caution: You must read this before you proceed Lounger Label Picture Description QTY A Seat 1 B Backrest 1 C Front Left Leg 1 C1 Front Right Leg 1 D Back Left Leg 1 D1 Back Right Leg 1 Noble house Home Furnishings LLC 1 OF 5
Label Picture Description QTY E Flat Washers 29 F Bolt:6*40mm 7 G Allen Key 1 H Bolt:6*60mm 9 I Bolt:6*20mm 13 Before Beginning Assembly: Noble house Home Furnishings LLC 2 OF 5
Step 1 Unpack all parts and place on a clean, non-marring surface. Positon as above and attach Seat(A) to Backrest(B) using Flat Washer(E) and Bolt(F) with Allen Key(G). Tighten Bolts completely in a sequential manner. Step 2 Place lounger flat, bottom facing skywards. Attach Front Left Leg(C) to Seat(A) using Flat Washer(E) and Bolt(H) with Allen Key(G). Repeat the same process with Front Right Leg(C1) Then, proceed to tighten these bolts completely, in a sequential manner.
Step 3 Attach Back Left Leg(D) to Seat(A) and Backrest(B) using Flat Washer(E) and Bolt(I) with Allen Key(G). Repeat the same process with the Back Right Leg(D1) Then, proceed to tighten bolts completely in a sequential manner. Step 4 Turn the Lounger right side up. Adjust the pre-installed Lounger Leg Levellers until the Lounger is level with the ground. Your Lounger is ready for use.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.
