Caution : You must read this before you proceed Dinning Chair Label Picture Description QTY A Backrest 1 B Seat 1 C Right Armrest / Leg 1 Page 1 OF 5
D Left Armrest /Leg 1 E Seat Cushion 1 Description QTY F Bolt(M6*35MM) 12 G Washer 12 H Allen Key 1 Label Picture Before Beginning Assembly: Page 2 OF 5
Step 1 Open the carton and place all the parts onto a clean and soft surface. Unpack all packages of hardware. Place the Backrest (A) with its inside facing skywards. Attach Seat(B) to Backrest(A) using Hardware(H, G) with Allen Key(H). LOOSELY TIGHTEN. ATTENTION: Occasionally some of the PE Wicker shifts and covers the mounting positions preventing easy assembly. The PE wicker should never be cut, but moved away from the mounting positions.
Step 3 Place the Left Armrest/Leg (D) as pictured above and affix to Backrest (A) and Seat(B) using Hardware(F, G) with Allen Key(H) as shown in Picture 4 and Picture 5. LOOSELY TIGHTEN. Step 4 Stand CHAIR rightside up. Check stability and then tighten the bolts. Note: DO NOT fully tighten a BOLT in one go and then move on to the next. Rather, In a sequential manner, gradually tighten each Bolt until all bolts are evenly secured.
Page 5 OF 5