Caution : You must read this before you proceed Chair Picture Label Picture Description QTY A Chair Back 1 B Left Armrest 1 C Right Armrest 1 Page 1 OF 6
D Chair Seat 1 J Foot 4 Description QTY E Washer Rings 11 F Bolts M6*60mm 11 G Bolts M6*25mm 16 H Allen Key 1 I Foot Leveller 4 Label Picture Before Beginning Assembly: Page 2 OF 6
Overview Chair Back(A) Right Armrest(C) Left Armrest(B) Chair Seat(D) Foot(J) Foot(J) This Chair has multiple parts and may require up to some 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean and soft surface.
Step 2 Place the Chair Seat (D) between the Chair Back (A) and the Left Arm (B) . Then attach the Chair Seat (D) to the Chair Back (A) and the Left Arm(B) with the hardware as picture 3 shows. Use an Allen key(H) to tighten them. Do not fully Tighten at this stage. Step 3 Place the Right Arm (C ) against the Chair Back(A) and Chair Seat(D). Insert the metal rod on the Chair Back(A) into the corresponding point in the Right Arm(C) as picture 4 shows.
Step 4 Attach the Right Arm(C) to the Chair Seat (D) with the hardware as picture 6 shows. Use the Allen Key (H) to partially tighten. Do not fully Tighten at this stage. Step 5 Attach the Legs(J) to the sofa as picture 7and 8shows. Use an Allen key(H) to completely tighten all bolts. Your Chair is ready for use. The Chari can only be used on a flat and level surface.
What is Proposition 65? Proposition 65 is a California law that requires warning labels on products that may contain one of more than 800-plus chemicals or ingredients that the California Office of Environmental Health Hazard Assessment (OEHHA) has deemed to cause cancer or other reproductive toxicity.