Caution : You must read this before you proceed Dining Chair Label Picture Description QTY A Backrest 1 B Left Armrest 1 C Right Armrest 1 D Seat Panel 1
Label Picture Description QTY E Allen Key 1 F Bolt (M6*35MM) 5 G Bolt (M6*20MM) 3 H Flat Washer 8 Before Beginning Assembly:
Backrest(A) Right Armrest(C) Left Armrest(B) Seat Panel(D) FRONT FACING This Dining Chair has multiple parts and may require up to 45 minutes to assemble. To give you an overview of the Dining Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise yourself with the parts and steps before assembly. Step 1 B Open the carton and place all the parts onto a clean, non-marring surface, preferably a working top.
Step 2 A B Attach and secure Backrest(A) to Left Armrest(B) using Bolts(G) and Washers(H) with Allen Key(E) Only Loosely Tighten Bolts. Step 3 A B D Attach the Seat Panel(D) to the assembled Backrest(A) and Left Armrest(B) using Bolts(F) and Washers(H) with Allen Key(E) Only Loosely Tighten Bolts.
Step 4.1 C Place the Right Armrest(C) onto the mounting bolts, and secure with Bolts(G) and Washers(H) with Allen Key(E). Only Loosely Tighten Bolts. Step 4.2 c Turn the chair over, and assemble the Right Armrest(C) using Bolts(F) and Washers(H) with Allen Key(E) Only Loosely Tighten Bolts.
Step 5 If wobble Test again 30CM~50CM Place the dining chair on a LEVEL SURFACE to check for wobbles. If it wobbles lift the dining chair to some 20cm to 30cm height from the ground. Keep your feet and toes well away from the drop zone. Drop the dining chair freely and vertically with the four legs, hitting the ground, all at the same time. This Drop Test will help to ensure that all the bolts and gaps to all reach full alignment status. Test again for evenness on a LEVEL SURFACE.