Assembly Instructions CHAIR CAUTION: You must read this before you proceed. CAUTION : This Chair is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Chair and to prevent damage to the Chair, 02 persons may be needed to execute this action.
Parts List No.
Hardware Chair Hardware No. Description Qty 1 Bolts M6 x 35mm 5 2 Sleeve Nuts M6 x 18 mm 5 3 Long Screws M4 x 50 mm 9 4 Short Screws M4 x 35 11 5 Allen Key 2 6 Screw Driver Not Provided Picture Assembly Preparation Before Beginning Assembly: Read instructions, cover to cover. Have 2 adults on hand for assembly. Do not assemble on flooring or carpet. Assemble on a clean non-marring surface (packing foam). Save all packaging until finished.
Assembly Steps OVERVIEW Back Cushion (F) Seat Cushion (G) Backrest Panel (C) Right Leg Panel (A1) Left Leg Panel (A2) Right Inside Leg Panel (B1) Left Inside Leg Panel (B2) Front Panel (D) Seat Panel (E) FRONT FACING This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly.
Assembly Steps Step 2 6 Step 2.1 3 3 3 Step 2.2 3 B1 A1 Place the Right Leg Panel (A1), top facing down, onto a clean, soft surface that will not scratch or damage Right Leg Panel. In step 2.1: Attach the Right Inside Leg Panel (B1) into the Right Leg Panel (A1) by using the Long Screws (③) and Screw Driver (⑥). In step 2.2: Attach the Right Inside Leg Panel (B1) into the Right Leg Panel (A1) by using the Short Screw (④) and Screw Driver (⑥). DO NOT FULLY TIGHTEN SCREWS. Step 3 6 Step 3.
Assembly Steps Step 4 Step 4.2 Step 4.1 A2 In step 4.1: Attach the Front Panel (D) into the assembled frame from Step 3 by using Bolts (①) and Sleeve Nuts (②) with Allen Key (⑤). In step 4.2: Attach the Backrest Panel (C) into the assembled frame from Step 3 by using Short Screws (④) with Screw Driver (⑥). DO NOT FULLY TIGHTEN SCREWS AND BOLTS. Step 5 A2 Step 5.2 D C A1 Step 5.1 With the help from your partner, attach the assembled frame from Step 4 into the assembled frame from Step 2. In step 5.
Assembly Steps Step 6 E With assistance from your partner,turn the Chair right side up. Attach the Seat Panel (E) onto the Chair. Step 7 Place the Chair on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently and gracefully, sit into to the Chair. This would help to align all the parts at all the joint areas. Then get off the Chair, and in a sequential manner, proceed to tighten all screws and bolts.
Assembly Steps Step 8 F G Ensure all screws and bolts are fully locked into position. Place Seat Cushion (G) and Back Cushion (F) into the Chair. The Chair is ready to be used. Caution: This Chair can only be used on a flat, level surface.
Care & Maintenance Do not put hot items directly on furniture surface. Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor products, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.
