Chaise Lounge CAUTION : This Lounge is NOT a TOY. Keep your child / children at bay during the assembly process.
Label Picture Description QTY ① Allen Key (M6) 1 ② Allen Key (M8) 1 ③ Bolt (M6*15MM) 3 ④ Bolt (M8*50MM) 3 Before Beginning Assembly: 2 OF 6
Overview Seat Panel (A) Front Leg (B) FRONT FACING This Lounge has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Lounge parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack all parts and place on a clean, non-marring surface.
Step 2 Place Seat Panel(A) flat, with the bottom facing skywards, as shown above. Step 3 Attach Front Leg(B) to Seat Panel(A), using Bolts(④) with Allen Key(②). Do not fully tighten the Bolts.
Step 4 Attach Front Leg Support Bar(C) between Front Leg(B) and Seat Panel(A) using Bolts(③) with Allen Key(①). Do not fully tighten the Bolts. Step 5 Inspect it and make sure all parts are adequately connected. Then, proceed to tighten all Bolts completely in a sequential manner. When tightening the Bolts, tighten sequentially. DO NOT tighten any Bolt fully and then move on to the next one. This may cause the frame to warp. Turn the Lounger right side up. Your Chaise Lounge is ready for use.
Do not put hot items directly on furniture surface Do not clean furniture with harsh cleansers or polish. To obtain the longest lifespan of your outdoor prodcts, minimizing exposure to direct sunlight is recommended. Children should not climb or jump on the furniture. Do not write on furniture without a padded barrier to protect the surface. To obtain the longest lifespan of your outdoor products, avoid extended and lengthy exposure to rain, snow, and direct sunshine.