Use and Care Manual

Assembly Instructions

Caution : You must read this before you proceed.

SQUARE TABLE

CAUTION : This table is NOT a TOY.

Keep your child / children at bay during the assembly process.

Assembly Preparation

Before Beginning Assembly:

1 OF 4

PAGE 1
Assembly Instructions Caution : You must read this before you proceed. SQUARE TABLE CAUTION : This table is NOT a TOY. Keep your child / children at bay during the assembly process.
PAGE 2
Parts list Description QTY A Table Top 1 B Table Leg 4 C Central Round Support Ring 1 Washers(8mm) 8 Spring Washers(8mm) 8 Hex Bolt (30mm) 8 Washers(8mm) 8 Spring Washers(8mm) 8 Hex Bolt (25mm) 8 Spanner 1 NO. Picture Hard ware ① ② ③ Assembly Step Overview Table Top(A) Central Round Support Table Leg (B) This SQUARE TABLE has multiple parts and may require up to some 30 minutes to assemble.
PAGE 3
Unpack and place all parts on a clean soft surface. ① ③ Loosely attach the Central Round Support Ring(C) to Table Legs(B) using washers, Spring Washers, and Hex Bolts(①), with the Spanner(③). DO NOT OVERTIGHTEN. ① ③ Repeat step 2, attaching the remaining 3 legs to the Central Round Support Ring(C) DO NOT OVER TIGHTEN. ② ③ Lay the Table Top(A), top facedown, onto a flat, soft, clean surface. Attach the Table Legs(B) to the the Table Top(A) using Washers, Spring Washers, and Nuts(②) with the Spanner(③).
PAGE 4
Stand the table rightside up. In a sequential manner, proceed to tighten up all screws. Your table is now ready for use.