Use and Care Manual

ManualsBrandsNoble House ManualsOutdoor Lounge ChairsTeak Brown Slatted Wood Outdoor Lounge Chairs with Blue Cushion (2-Pack)

CAUTION: You must read this before you proceed.

CAUTION : This Armchair is NOT a TOY.

Keep your child / children at bay in the process of assembly.

For turning the Armchair and to prevent damage to the Armchair, 02 persons may be

needed to execute this action.

ARMCHAIR

Summary of content (6 pages)

PAGE 1
ARMCHAIR CAUTION: You must read this before you proceed. CAUTION : This Armchair is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning the Armchair and to prevent damage to the Armchair, 02 persons may be needed to execute this action.
PAGE 2
Description Qty A Backrest Panel 1 B Left Arm Panel With Pre-installed Levellers 1 C Right Arm Panel With Pre-installed Levellers 1 D Seat Panel 1 E Back Support Bar 1 F Front Support Bar 1 G Seat Cushion 1 H Back Cushion 1 Description Qty No. No.
PAGE 3
OVERVIEW Backrest Panel (A) Back Cushion (H) Right Arm Panel (C) Left Arm Panel (B) Seat Cushion (G) Back Support Bar (E) Seat Panel (D) Front Support Bar (F) FRONT FACING This Armchair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Armchair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly.
PAGE 4
Step 3 Step 3.1 Step 3.2 Then keep position Backrest Panel (A) as shown in picture above. Align the tenon of Back Support Bar (E) and Front Support Bar (F) into the Mortise of the Right Arm Panel (C). Step 3.1: Affix Right Arm Panel (C) with Backrest Panel (A) by using Long Screw (①) and Allen Key (④). Step 3.2: Affix Right Arm Panel (C) with Backrest Panel (A) by using Bolt (③) and Allen Key (④). DO NOT FULLY TIGHTHEN SCREWS.
PAGE 5
Step 5 Attach the Seat Panel (D) onto the Armchair as shown in picture above. Affix Seat Panel (D) with Armchair by using Short Screws (②) and Allen Key (④). Note: Using Short Screws (②) from inside to outside of Seat Panel (D) DO NOT FULLY TIGHTHEN SCREWS. Step 6 Adjust Pre-installed Levellers height for balance Inspect the Armchair and make sure all parts are adequately connected. In a sequential manner, tighten all Screws at all joints.
PAGE 6