Instructions / Assembly

Page 4

Assembly Steps

Step 1

A. Seat

B. 'H' Leg Frame

C. Side Rails

Place the Barstool Seat (A) onto a soft surface to avoid any scratches or damages to the product.

REMOVE the Seat Base Cover from the underside of the Seat (A), take out the Side Rails (C) and

hardware.

Step 2

Insert the Side Rail (C) into the oval housing of 'H' leg frame (B) as shown above.

Then, use the hardware of Part B to attach the Side Rails (C) to the other 'H' Leg frame (B).

WARNING !! DO NOT OVER TIGHTEN. OVER TIGHTENING COULD LEAD TO DAMAGE OF

THE PRODUCT. TIGHTEN ONLY UNTIL SECURE.