Instructions / Assembly

ManualsBrandsNoble House ManualsOtherRichardson 13.68 ft. Free-Standing Hammock in Multi-Blue, Red and White Stripe

Label Picture Description QTY

Supporting Bar to hold

Hammock

Mid-Joint Support Bar 2

C Ground Bar 2

Hammock with

Wooden Support Rail

O Rope with Carabiners 4

Caution: You must read this before you proceed

Picture

CAUTION : This Hammock on Wooden Stand is NOT a TOY.

Keep your child / children at bay in the process of assembly.

Have at least 03 men to help when assembling this Hammock on Wooden

Stand.

Hammock on Wooden Stand

Summary of content (7 pages)

PAGE 1
Hammock on Wooden Stand Caution: You must read this before you proceed Picture CAUTION : This Hammock on Wooden Stand is NOT a TOY. Keep your child / children at bay in the process of assembly. Have at least 03 men to help when assembling this Hammock on Wooden Stand.
PAGE 2
Label Picture Description QTY D Bolt(M10X14CM) 4 E Washer 19 F Nut 10 L Bucket Wrench 2 H Bolt(M10X24CM) 4 J Metal Chain with Iron Carabiners 2 K Eye Bolt 2 Q Bolt and Ring Nut 4 R Allen Key 1 N Bolt and Ring Nut 2 Before Beginning Assembly:
PAGE 3
Step 1 Note : The COUNTERSINK hole side of Wooden Bar(B) should be on the outside. Attach Mid-Joint Support Bar(B) to Ground Bar(C) using Bolt(D) & Washer(E), as shown in the picture. In this step, DO NOT tighten the bolts. Step 2 NOTE : Have a couple of partners / assistants when assembling this step. Put Support Bar to hold Hammock(A) into Mid-Joint Supporting Bar(B). Then attach using Bolt(H) with Hardware(E,F) using Bucket Wrench (L). Tighten the bolts of this step securely.
PAGE 4
Step 3 E NOTE : This step should be finished with two or more people together. Tighten the Bolts (D) from Step 1 using Hardware(E,F) with Bucket Wrench (L). Tighten the bolts securely. Step 4 Attach the Eye Bolt(K) to the tail end of the Support Bar to hold Hammock(A) using Hardware(E,F) with Bucket Wrench(G,L). Tighten the bolts of this step securely. Note: The Eye Bolts should be facing the inside of the frame assembly, as pictured.
PAGE 5
Step 5 Screw theBolt and Ring Nut(Q) to the four ends of the Wooden Suport Rails using allen key (R) Tighten the bolts of this step securely. Step 6 N Insert the Bolt and Ring Nut (N) into the Support Bar to hold Hammock(A), as shown in the picture. Tighten the bolts of this step completely. Step 7 J J M Hook the Chain with Carabiners (J) to the 2 two loop holes of at then end of Hammock with Wooden Support Bars (M).
PAGE 6
Step 8 Connect the Hammock(M) to the Support Bar to hold Hammock(A) using Chain with Carabiners(J). Step 9 Connect the four pieces of Eye Bolts(K) on the Hammock(M) to the Bolt and Ring Nut (N) on Supporting Bar to hold Hammock(A) with Rope with Carabiner(O). Adjust the Chain withCarabinerss(J). until the four Ropes are taut. Your Hammock is ready for use.
PAGE 7