Instructions / Assembly

Step 4
Step 5
Repeat the same assembly process for the Right Leg with Arm (with pre-
attached Levellers)(C).
DO NOT fully tighten at this stage.
Stand the chair rightside up.
Now, fully and securely, tighten all nuts, at all joints.
Add Rubber Caps( ⑤ ) on all bolt ends to protect skin or clothing from
getting snagged.
Adjust the Pre-attached levellers at the bottoms of the chair legs until the chair is
level with the ground.
Your chair is ready for use.
Caution: This Chair can only be used on a flat, level surface.
Adjust height
for balance
Adjust low for
balance
⑦
④
③
②
①
Page 5 OF 6